Downloads and Forms to Print
The 4 forms below can be used when you have an existing door and frame and you are replacing either just the door or just the frame. Please print the form that is applicable to you, fill it out, and send it to us so we can be sure the hinge and lock locations will match what you already have existing.
- Single frame with 3 hinges
- Single frame with 4 hinges
- Double frame with 6 hinges
- Double frame with 8 hinges
A variation of the 4 forms above. You may prefer this one over the others...please feel free to use either or both types.
Below is a 1 page "informational flyer" for SPS - Architectural Division, a hinge location sheet showing the hardware locations for various commercial door manufacturers, and installation instructions and trouble shooting guide for hollow metal doors and frames.
- SPS Flyer - A one page flyer showing some of what we supply and some of the services we provide.
- Hinge Location Sheet - Shows several different manufacturers hinge and lock locations from the frame top to the top of each hinge.
- SDI 122 - Installation and Troubleshooting Guide for Standard Steel Doors and Frames.